How to Connect Shark Robot to New Wi-Fi [A Quick And Easy Guide]

Shark Robot vacuums, with their smart features and autonomous cleaning ability, are redefining the way we clean our homes. However, like all smart devices, they depend heavily on a steady Wi-Fi connection to function optimally.

Whenever we switch our Wi-Fi network, perhaps due to moving homes or changing service providers, we are faced with the task of reconnecting our beloved Shark Robot to the new network. At first glance, this might seem intimidating, especially with the different models of Shark Robots available, each having its unique set of features and connection steps.

This guide aims to demystify the process and provide you with a step-by-step walkthrough to quickly and efficiently get your Shark Robot back on its wheels and ready to clean in a flash.

Identifying Your Shark Robot Model

Before you start with the setup process, it’s crucial to identify your Shark Robot model because different models might have slightly different steps for connection. You can do this by checking the label on the underside of your Shark Robot.

Shark Robot models include the Shark ION ROBOT 700 series, Shark ION ROBOT 750 series, Shark ION ROBOT 1000 series, AV970, AV993, AV992, and more. Each model varies slightly in its technological capabilities and Wi-Fi connectivity options.

For example, the Shark ION ROBOT 750 series and newer models are designed with Wi-Fi connectivity in mind and have an easy connection process. On the other hand, models like the Shark ION ROBOT 700 series may not come with built-in Wi-Fi connectivity.

Knowing your Shark Robot model will save you from potential frustration and help assure a smooth setup process. Familiarize yourself with the features offered by your specific Shark Robot to make the most of its smart cleaning capabilities.

Preparing Your Shark Robot for New Wi-Fi Connection

To ensure a smooth and successful connection of your Shark Robot vacuum to new Wi-Fi, it is essential to set the stage optimally. Here’s the step-by-step process to prepare your Shark Robot:

1. Check the Battery Level: Your Shark Robot should be fully charged or have sufficient battery power before you proceed. A low battery can interrupt the connection process and have an impact on the results.
2. Bring Your Shark Robot Close to the Router: The closer your device is to the Wi-Fi router, the stronger the signal strength. During the initial setup, especially when your robot is connecting to the network for the first time, it is best to reduce as many potential sources of interference as possible.
3. Have Your Wi-Fi Password Handy: Make sure you have the correct Wi-Fi password for your new network. It’s a small thing, but mixing up letters or forgetting a password can make a straightforward process frustrating.
4. Download the Shark Robot App: If you haven’t done it already, download the Shark Robot app from the App Store (for IOS users) or Google Play Store (for Android users). You will need this to connect your robot to Wi-Fi.
5. Prepare Your Smartphone: Your smartphone must be connected to the Wi-Fi network to which you want your Shark Robot to connect. Remember it should be a secure, private network and not a public one.

Your Shark Robot and the ambient setup are now ready to start the Wi-Fi connection process. Follow along with these steps and, in no time, your clever little cleaner will be back online and ready to make your home spotless!

A Detailed Guide to Connect Your Shark Robot to New Wi-Fi

Step 1: Turn on Your Shark Robot

The first step in connecting your Shark Robot to a new Wi-Fi is to ensure it’s turned on. Press the “Power” button on the top of the device. The light on the top panel indicates that the robot has power.

Step 2: Initiate the Shark Robot’s Wi-Fi Setup

To connect your Shark Robot with your new Wi-Fi, you will need to initiate the Wi-Fi setup function. Hold the “Dock” and “Clean” buttons simultaneously for about 5 seconds until the light flashes blue, indicating that your device is in the setup mode.

Step 3: Opening the SharkClean App

Launch the SharkClean app on your mobile device or tablet. If you haven’t yet installed the app, you can download it for free from the Google Play Store for Android or the App Store for iOS.

Step 4: Adding the Shark Robot to the App

To integrate your Shark Robot with the app, tap on “Add New Device” within the app. Scroll through the list of devices, and select the model of your Shark Robot. If you haven’t registered your product yet, the app will prompt you to do so. Just follow the on-screen instructions for this step.

Step 5: Connecting to Your New Wi-Fi Network

Next, you will need to connect your robot to your new Wi-Fi network. Make sure your phone or tablet is connected to the new Wi-Fi network that you want your robot to connect to. In the app, you will be asked to select your Wi-Fi network and enter the password. Once that is done, the app will connect your robot to your new Wi-Fi.

Step 6: Finalizing the Connection

Once the connection between your Shark Robot and your new Wi-Fi is established, you’ll see a message on the screen confirming the successful setup. Now, your robot is ready to clean as directed by you from anywhere in the world.

Remember, you might need to patiently wait during some steps, as the process can take a few minutes. With the above steps, you can easily connect your Shark Robot to a new Wi-Fi network.

Note:

You should know that Shark Robots only connect to 2.4 GHz Wi-Fi and do not support the 5 GHz frequency. Therefore, when switching Wi-Fi networks, ensure the router’s 2.4 GHz Wi-Fi is active.

Troubleshooting Common Connection Issues

The tech landscape is not without bumps and snags, so if you encounter any troubles when setting up your Shark Robot, don’t worry. Below we’ve mapped out some common issues and their solutions.

The Shark Robot Won’t Connect to the Network

If your Shark Robot is not connecting to the Wi-Fi, first try resetting your router; it could be a simple temporary network issue. Then, check if any software updates are due on your SharkClean App or the Robot itself. Updating often resolves such issues.

The Connection is Constantly Dropping

Inconsistent Wi-Fi signal or interference from other devices can sometimes cause this problem. Try moving your router to a more central location in your home. Disconnect any device not in use from the network to reduce network traffic and interference.

The Shark Robot is not Responding to the App

If the Shark Robot is not responding to commands from the app, try to clear the cache on your phone or test it on another device. Sometimes, the compatibility issues of certain devices cause this problem.

The Wi-Fi Light on the Shark Robot Fails to Illuminate

This could be due to two reasons. First, the robot may not be in pairing mode. To rectify this, hold down the ‘dock’ and ‘max’ buttons simultaneously for about five seconds until you hear a tone. Second, the battery could be depleted. Place the robot on the charging dock until it’s adequately charged.

Always remember: it’s reasonable to experience technical hiccups with smart devices. With a measured approach, these challenges are quite manageable. Don’t hesitate to reach out to Shark Robot customer support if you continue experiencing difficulties; they are there to help.

Conclusion

In conclusion, connecting your Shark Robot to a new Wi-Fi network does not have to be an overwhelming task. Remember to identify your model, prepare your Shark Robot for the connection, follow our step-by-step guide to connect, and know how to troubleshoot common issues.

Soon, your smart home will be back to its efficient, automated self, leaving you more time for the things that matter most.

Frequently Asked Questions

1. How can I reset the Shark Robot? Resetting the Shark Robot can be a crucial step when connecting to a new Wi-Fi network, and there are specific steps to follow which differ among models.
2. Why won’t my Shark Robot connect to my Wi-Fi? There could be several reasons why your Shark Robot won’t connect. We address these issues and how to overcome them in the “Troubleshooting Common Connection Issues” section.
3. Can I use the same Shark Robot in different Wi-Fi networks? Yes, you can but the Shark Robot needs to be connected to the new Wi-Fi whenever it changes. Follow our guide to know how it can be done effectively.

Useful Resources

1. Shark Robot Videos and App Guide
   • A comprehensive source of detailed instructions, tips, and tricks about various models of Shark Robot via helpful videos!
2. Shark Robot Official Site
   • The official Shark Robot website contains useful information about the different models, their capabilities, FW updates, and customer support resources.

Remember, your smart home is a hub of efficiency. A Wi-Fi hiccup shouldn’t slow you down for long. With this handy guide, your Shark Robot will be back to helping you maintain a clean environment in no time.