How to Reset Govee Lights [We've Made It Easy For You!]

If you’re a fan of smart home gadgets, you’ve probably encountered or even own Govee LED lights.

These innovative lighting solutions not only provide ambiance but also come with a host of smart features, easily controllable via remote or the Govee Home app.

But, like all tech products, they may require a reset from time to time.

Whether you’re troubleshooting connectivity issues, preparing to resell your lights, or simply want to restore factory settings, understanding how to properly reset these lights is a key skill to have.

In this article, we’ll go over why you may need to reset your Govee lights, how to prepare for it, and of course, a step-by-step guide to the actual reset process.

By the end of this article, you’ll have gained valuable insights and practical steps for successfully resetting your Govee LED lights.

So let’s get started!

Why Resetting Your Govee LED Lights May Be Necessary

Resetting your Govee LED lights isn’t just a random action you take; it serves specific purposes that can significantly enhance your user experience.

Here’s why you might need to hit that ‘reset’ button.

Troubleshooting Connectivity Issues

Govee LED lights can usually be controlled via a mobile app, allowing for seamless integration into your smart home system.

However, there may be times when the lights don’t respond or fail to connect to the app or other smart devices.

A quick reset can often resolve these connectivity issues and restore normal operation.

Restoring Factory Settings Before Resale or Relocation

If you’re considering selling your Govee LED lights or moving them to a different location, it’s advisable to restore them to their factory settings.

This not only protects your personal preferences and data but also makes it easier for the next user to set them up anew.

Fixing Performance Issues or Glitches

Like all electronic devices, Govee lights are not immune to software or hardware glitches.

You might encounter irregularities such as unresponsive controls, erratic color changes, or reduced brightness levels.

Resetting the lights can help clear any temporary data or settings that may be causing these issues.

Common Challenges

Resetting Govee lights is generally a straightforward process, but it’s not without its challenges.

For instance, some users find it hard to locate the reset button, or they’re unsure about whether the reset has been successful.

We’ll address these common challenges in the step-by-step guide later in this article, to make the process as smooth as possible for you.

Preparing to Reset

Before diving into the actual reset process, it’s crucial to prepare appropriately.

Taking the time to prepare ensures that the reset goes smoothly and that you can quickly get your Govee LED lights back to their optimal functioning.

Here’s how to get ready.

Materials Needed

To reset your Govee LED lights, you may need one or more of the following:

Govee Home App – Ensure it’s updated to the latest version if you plan to reset via the app.
Remote Control – If your Govee lights came with a remote control, have it at hand.
Pin or Clip – For manual reset, a small pin or clip will be needed to press the reset button.

Pre-Reset Checklist

Before you proceed with the reset, consider the following:

Ensure Lights Are Plugged In and Functional
Make sure the Govee LED lights are plugged into a power source. If they’re battery-operated, ensure the batteries are in good condition.
Back-Up Customized Settings
If you’ve customized various light settings through the Govee Home app, it’s wise to back these up. Some resets may revert all your customizations back to factory settings.
Check Connectivity
If you’re using the app to reset, ensure your mobile device is connected to the same Wi-Fi network as your Govee LED lights. This is necessary for the app to communicate with the lights for the reset process.
Read the Manual
Quickly go through the user manual to see if there are any model-specific instructions for resetting your Govee LED lights. Different models might have slightly varying reset procedures.

By meticulously preparing, you’re setting the stage for a hassle-free reset process.

Next, we’ll move on to the step-by-step guide to resetting your Govee LED lights, where we’ll demystify each method for you.

Step-by-Step Guide to Resetting Govee LED Lights

Now that you’re prepared, let’s dive into the actual resetting process. Depending on your setup and the Govee model you own, there are different methods for resetting Govee LED lights: using the Govee Home app, utilizing the remote control, or performing a manual reset. Here’s how to accomplish each.

Using the Govee Home App

Step 1: Open the App

Launch the Govee Home app on your mobile device and make sure you’re logged in.

Step 2: Navigate to Device Settings

Select the device (your Govee LED lights) from the main dashboard. Then tap on the settings icon, usually represented by a gear symbol.

Step 3: Tap on ‘Reset Device’

Scroll down the settings menu until you find the ‘Reset Device’ option. Tap on it.

Step 4: Confirm and Wait

A confirmation message will pop up. Confirm the action and wait for the reset process to complete. Your lights should flicker or change color briefly to indicate a successful reset.

Using Remote Control

Step 1: Identify the Reset Button

Locate the ‘Reset’ button on your Govee remote control. This button is often labeled as ‘RST’ or ‘Reset.’

Step 2: Hold Down the Reset Button for 5 Seconds

Press and hold the reset button for approximately 5 seconds.

Step 3: Release and Wait

Release the button and wait for an indicator light to blink on the remote or for the Govee LED lights to flicker, signaling a successful reset.

Step 4: Confirm the Reset

Use the remote to cycle through colors or settings to confirm that the lights have been reset to factory settings.

Manual Reset

Step 1: Locate the Reset Pinhole

Find the small hole designated for resets, usually located near the power cable or on the control box.

Step 2: Insert a Pin or Clip

Carefully insert a pin or clip into the reset hole.

Step 3: Hold for 5-10 Seconds

Press and hold the pin or clip for 5 to 10 seconds. Your lights should flicker or change color to indicate a successful reset.

Step 4: Wait for Confirmation Blink

Once you’ve released the pin, wait for a confirmation blink or color change from the Govee LED lights to ensure the reset is successful.

Regardless of the method you choose, resetting your Govee LED lights should be a straightforward process, especially if you’ve taken the time to prepare as we outlined earlier.

Now that your lights are reset, you can move on to reconnecting them with your smart home setup or applying any previous customizations you’ve saved.

Post-Reset Steps

To get your lights back into perfect working condition and reintegrate them into your smart home setup, you’ll need to complete a few post-reset steps.

Here’s what you need to do next.

Reconnect to Govee Home App

Open the App: Launch the Govee Home app on your mobile device.
Add Device: Tap on the “Add Device” button, usually represented by a “+” symbol.
Follow On-screen Instructions: The app will guide you through the process of reconnecting your lights. This often involves selecting the type of device you’re adding, entering your Wi-Fi credentials, and following any pairing steps that appear.

Reconnect to Other Smart Home Devices

If your Govee lights were previously connected to other smart home devices like Amazon Alexa or Google Home, you’ll need to reconnect them. Navigate to the respective smart home app and look for options like “Add Device” or “Discover New Devices” to begin the reintegration process.

Reapply Custom Settings

Import Backups: If you backed up your customized settings earlier, this is the time to restore them through the Govee Home app.
Manual Reconfiguration: If you didn’t make a backup, you might have to manually reconfigure your settings, such as color combinations, brightness levels, and automation routines.

Test Functionality

Test Basic Functions: Cycle through different colors, brightness levels, and patterns to ensure everything works as it should.
Test Connectivity: Ensure the lights respond reliably through the Govee Home app and any other connected smart home platforms.
Test Automations: If you had any automated routines or schedules set up, test them to make sure they execute correctly.

By following these post-reset steps, you’ll ensure that your Govee LED lights are not only reset but also fully functional and ready to be used again or integrated into your smart home setup.

Conclusion

Resetting your Govee LED lights may initially seem like a daunting task, but as you’ve seen in this guide, it’s a straightforward process that anyone can master.

We’ve covered why you might need to reset your lights, how to prepare for the reset, and step-by-step guides for each reset method.

We also didn’t forget about what comes after a reset—making sure you’re fully up and running again with minimal fuss.

Taking control of your smart home gadgets like Govee LED lights is not just empowering but also ensures that you get the best possible experience from your devices.

So the next time you encounter a glitch, want to sell your device, or simply feel like starting anew, you’ll know exactly what to do.

Frequently Asked Questions

How do I know if the reset was successful?
Your Govee LED lights will generally flicker, blink, or change colors momentarily to indicate a successful reset.
Can I reset multiple Govee devices at once through the app?
The Govee Home app usually handles devices individually, so you’ll need to reset each light or light strip separately.
Do I need to uninstall the Govee Home app to complete the reset?
No, uninstalling the app is not necessary. The reset process affects the device itself and doesn’t require app removal.

Useful Resources

Feel free to explore these resources to deepen your understanding of Govee LED lights and how to make the most of your smart home setup.