How to Reset Your Roborock Vacuum: A Comprehensive Guide
Having a Roborock vacuum in your home is a great tool for keeping your living spaces clean. This intelligent device is designed to ease the burden of household chores, giving you more time for things that truly matter to you.
However, over time, you may notice that your robotic vacuum isn’t performing as well as it should, or you may experience software glitches that impact its functionality.
Alternatively, you may be planning to sell or gift your device to someone else. In these scenarios, resetting your Roborock vacuum can be a handy solution to consider.
Resetting a device often corrects minor issues by wiping any settings that could be causing performance problems and giving the vacuum cleaner a fresh start.

This guide will take you through the reasons for resetting your device, help you prepare appropriately before initiating a reset, guide you through the reset process, and advise you on what to do post-reset to maximize your Roborock vacuum’s performance.
With patience and the correct guidance, you’ll find this process smooth and straightforward.
Let’s dive in.
Reasons to Reset Your Roborock Vacuum
Sometimes, there might be a need to reset your Roborock vacuum to fix certain issues. Here, we uncover some common scenarios when you might consider resetting your gadget.
Performance Issues
If your Roborock vacuum is not performing up to its usual standard, a reset might be what it needs. This could be due to various issues like your vacuum not cleaning effectively or missing sections of the floor.
Software Malfunctions
If the software of your Roborock vacuum is behaving irregularly or causing problems, resetting often represents a clean slate. Issues like these might include the vacuum not responding to commands or failing to recharge properly.
Selling or Giving Away Your Vacuum
Before parting with your Roborock vacuum, it’s advisable to perform a factory reset. This removes all your personalized data from the device and prevents it from being accessed by others.
Remember, resetting the device will revert everything to its original factory settings and should be taken as a last resort for performance issues and software malfunctions. In the case of significant technical issues, it’s recommended to contact the manufacturer or authorized service center for further assistance.
Preparation for Resetting Your Roborock Vacuum
Before you proceed with resetting your Roborock vacuum, it is critical to prepare your device. Following steps not only prevent loss of important data or settings but also ensure that the reset process achieves its purpose.
Understand the Implications
First and foremost, critically understand that a reset operation will restore your vacuum to its factory default settings. This means that all your personalized settings, scheduled cleans, and customizations will be erased. However, this operation will not affect the device’s firmware version.
Backup Custom Maps
If you’ve spent time creating custom cleaning maps for different areas in your home, make sure to back these up, as they’ll be deleted during a reset. Unfortunately, Roborock vacuums do not support an official method for backing up cleaning maps. However, you might want to take screenshots of your existing maps as a reference for recreating them post-reset.
Locate the Reset Option
In your Roborock vacuum, the reset option is housed within the system settings. Navigate to your Roborock’s control interface, and from the main menu, navigate to the ‘System Settings’. On some models, it may be under the ‘General Settings’ menu.
Ideal Environment for Reset
Ensure your Roborock has ample battery left before initiating the reset. Preferably, the device should be docked at its charging station during the reset process. This not only provides stable power but also allows the vacuum to relocate itself accurately in the home layout post-reset.
The resetting process is quite straightforward, once adequately prepared. In the following sections of this guide, we will delve into the exact steps for performing a reset, and what actions to take afterward. Keep reading, and you’ll have your Roborock vacuum reset and ready to go again in no time.
Step-By-Step Reset Process
Step 1: Ensure the Roborock Vacuum is Powered On
Before we can reset the Roborock device, we must ensure it’s powered on and ready to receive commands. If you’re unsure, press the “Power” button on the vacuum. It should light up and possibly make a startup sound.
Step 2: Accessing the Reset Controls
The reset controls are located on the Roborock vacuum. Start by looking on the side or at the back of the device, usually around the dustbin. There you’ll find a small hole labeled “RST” or “Reset”. This is the reset switch.
Step 3: Pressing the Reset Button
Using a paperclip or a pin, gently press inside the reset hole and hold for about 3-5 seconds. The device should emit an auditory cue (a beep or a voice prompt) to indicate that the reset process has begun.
Step 4: Wait for System Reset
Once the reset button is pressed, let Roborock vacuum do the remainder of the work. It will reset its internal systems, which usually takes about 1-2 minutes. During this time, do not disconnect the power or attempt to use the vacuum.
Step 5: System Reset Complete
Once the reset process is complete, the Roborock vacuum will reboot itself. Again, there will be an auditory cue to indicate that the reboot has finished and the reset successful.
Step 6: Reconnect the Roborock with the App
After the reset, re-open the Roborock app on your mobile device and follow the prompts to set up your vacuum again. Now you can reconnect your Roborock vacuum with your WiFi network and resume cleaning.
And there you have it. These six simple steps will guide you through the process of resetting your Roborock vacuum. Remember, a reset will only be required in certain situations. Always try to troubleshoot any minor issues first before resorting to a reset.
Post-Reset: What to Expect and What to Do Next
After you’ve successfully reset your Roborock vacuum, it’s important to keep in mind that the device is back to its factory settings – this means it’s as good as when you first brought it home. However, you will have to reconfigure settings or preferences that you had previously set. Here’s what you need to do next:
Update the Firmware
First things first, you must ensure that your Roborock vacuum is running the latest version of its firmware. If ignored, older firmware might lead to performance issues. To update, connect your device to the Roborock application and follow the in-app prompts to update your device firmware.
Configuring Your Settings
Navigate to the settings section in the Roborock app. Here, you’ll have to re-establish the essential settings. This includes setting up Wi-Fi, adjusting the volume level of the vacuum, and setting cleaning preferences. Each of these components can significantly alter the vacuum’s operation, so be sure to adjust to your liking.
Set Up Your Cleaning Maps
If you had previously set up cleaning maps in your house, you’d have to redo them as part of the reset. You have to run the vacuum for a complete cleaning cycle, during which it will map your house again.
Schedule Your Cleanings
The final step is to re-establish any schedules you had previously set. If you want your vacuum to clean when you are not home, be sure to set the specific days and times for this.
Remember, while resetting gave your device a fresh new start, it’s your responsibility to tailor it according to your needs and preferences to optimize its performance. Any minor performance tweaks can make the Roborock vacuum a more effective cleaner and smarter home device.
Conclusion
Resetting your Roborock vacuum should give you a fresh start, improving the functionality and performance of your device while resolving any inconsistencies or issues you were experiencing.
After performing a reset, always ensure you update to the latest firmware, set up your cleaning maps, and adjust the essential settings.
Remember, maintenance is key. Regularly check on your vacuum’s condition, clean it as required, and observe if it’s running smoothly.
If issues persist after a reset, how about seizing the opportunity to explore customer support? Reach out to Roborock’s customer service – they’ll be more than happy to assist you with troubleshooting or addressing concerns to ensure a seamless cleaning experience with your vacuum.
Also, it’s worth keeping in mind that smart home technology, despite its benefits, can sometimes pose challenges. It’s okay not to know everything and to ask for help when needed.
We’re all learning and navigating this technologically advanced world together!
Frequently Asked Questions
- Q1: What will happen if I reset my Roborock vacuum? Resetting your vacuum returns it to its original factory settings, erasing all data including your schedules, maps, and custom setups.
- Q2: Can I recover my previous settings after resetting the device? Unfortunately, once the device has been reset, all data is permanently lost and cannot be recovered.
- Q3: What should I do if my vacuum has issues after the reset? If issues persist after the reset, consider reaching out to Roborock’s customer support or consult the user manual for advanced troubleshooting.
Useful Resources
Here are some useful resources to better equip you with information about the Roborock vacuum:
- Roborock Official Website: This is the official website of Roborock where you can find the latest updates, news, and firmware releases for your device.
- Roborock User Manual: This link contains the user manual for various Roborock models. Each manual provides an in-depth guide on operation, maintenance, and troubleshooting.
- Roborock Community Forum: Here, you can interact with other Roborock users, share experiences, ask questions, or get real-time responses for your troubles.
- Roborock YouTube Channel: This contains helpful video tutorials, product reviews, and informational content about your Roborock vacuum.